In a previous article we dedicated to the main items to look out for when buying LED Strip Lights for the very first time. Now we will get you through the next phase; installation. Installing your LED Strips could be anything from very easy to quite difficult, but ultimately it all hangs about what end result you are trying to achieve along with your lighting system. For example, introducing a 1 metre strip of LED lighting into your kitchen cabinet might be a many more straight forward than using 20 metres of RGB LED Strip Lights to outfit a team and run this on DMX Control. Whatever you do there are certainly a few universal items to look out for and this short article will get you through some of them.
We shall start with the LED Tape itself. This includes a long little bit of high impact, flexible circuit board with surface mounted devices, or SMDs, positioned along its length. There are certainly a few different items to consider here including, LEDs per metre, LED chip size, strip light colour and length. Strip Lights are available in two LED per metre varieties ecopac led driver, 30 LED per metre and 60 LED per metre. As suggested by the name the latter has two times as many LEDs and is a lot brighter compared to former. They are designed to be found in a lighting context where they’re forced to contend with background illumination. So like if you wish to use them in a daylight setting, such as a shop street display, or add them to a room that already has general illumination and still want them to be seen, you need to go for 60 LED per metre as their sharper light output makes them suited to these purposes. Apart from this a 30 LED per metre strip will have the ability to deal with other lighting arrangements, such as for instance club setups, or somewhere else they don’t need certainly to contend with background lighting.
When you go through the specifications of strip lighting you will usually notice a series of four numbers that to the majority of people mightn’t mean a lot. These actually refer to how big the in-patient LEDs on the strips. Typically you will find chip sizes of either 5050 (5mm by 5mm) or 3528 (3.5mm by 2.8mm). The key difference between those two types of chip size is the consistency of light they produce. Smaller LEDs will generate a more jagged and inconsistent effect, while larger LEDs provides a more even spread of light.
Another decision to create is precisely what colour strip light you wish to buy. They are usually for sale in three main colour varieties, including warm and cool white and interchangeable RGB. The former two are for adding stylish ambient lighting to commercial and domestic settings while avoiding being too garish with the end result. They can be used to aesthetically to enhance the looks of a room by the addition of layered or accent lighting, or they are able to add functionality to kitchens, bathrooms or offices where they can be used as task lighting to aid work. RGB LED is really a direct replacement old fashioned disco lighting and offers tens and thousands of programmable effects. Typically they will run directly from a remote control which works in conjunction with a red eye sensor attached between the strip light and transformer. However, DMX Control can be an option. This is a kind of advanced effects programming that uses an industry standard signal to manage the brightness, colour and frequency of the lights.
Probably the most obvious consideration to create is the exact length of strip lighting that you require. This is dependent upon the nature of one’s setup and how complex your intentions are. Usually most lighting arrangements can be achieved with an individual strip. Strip Lights are available in 5 metre and 10 metre reels as standard, but longer or shorter bespoke lengths could be ordered so call your provider to locate out. Lengthening or shortening strip lighting can be carried out all on your own as well. To shorten a strip light can be carried out by simply cutting the strip at one of its cutting points spaced approximately 5cm apart along the size of the light. To add two items of strip together, and thereby increase the size of the light, you will require a soldering iron and some two core wire. Simply solder these wires for their respective plus and minus solder points at the conclusion of the strip light where the cut has been made and do exactly the same on one other strip to complete the connection. This technique can be used to attain a little extra length, especially when trailing them around a large corner.
This information has given you a some of the main specifications connected with LED Strip Lighting and how to make certain you receive the right light you need for your purposes. Be aware of additional articles on how best to make sure you meet the energy requirements of one’s lighting system.